Max. Operating pressure: 500 mbar
Nominal diameter: DN 65
Approvals: EN 161

Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
 DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight

Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.

Increased Lifetime
Increased Plant Availability
Worldwide Approvals 

From Analog to Digital

• Soft opening and closing - constant by electronic and constant under all conditions
• Software regulated - BUS communication & Adaptive damping
• Extended temperature range  (- 20 deg C to 60 deg C)
• Universal power supply 
• Lower power consumption

Contact us for more information!

The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases.

The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request). The SL 10 is available with thread connections Rp 1'', Rp 1,5'', Rp 2'' and blow off pressure up to 3,5 bar. All safety relief valves are certified by DVGW and CE.

Our gas regulator from MEDENUS for Hydrogen application.
The specific pressure and tightness test for hydrogen applications is done at MEDENUS with helium as the test medium.

The results of investigations by RWTH Aachen have shown that the alloys used by us can be used without restrictions for dry hydrogen up to an inlet pressure of 16 bar and represent an attractive alternative to conventional steel/cast iron and copper materials. Additional advantages are their substantially reduced weight, thus giving better handling and a higher corrosion class (C5-I) even without painting.

The alloys that were examined are used at MEDENUS not only for spring-loaded (R and RS series) but also for pilot-controlled gas pressure regulators (RSP series), cellular gas filters (DF 100 series), and safety relief valves (SL 10 series) in all nominal widths up to DN 200.

To know more, do contact us!

- to guarnatee an accurate regulation of the flow in the pipeline
- by manually rotating the tap is possible to regualte the orifice opening area which is accurately adjsuted by a conical shutter
- suitable for non corrosive gas and liquif fluids 

Throttle and control valves for industrial ventilation systems for all temperature and pressure ranges!

• High Performance Valves
• Bespoke Valves - special design produced accroding to your specifications
• Allround valves - all regular applications

Contact us for more information!

Pmax 500mbar
Rp 2

• 30s/90 degree
• 15 Nm
• IP65

#220968
Pmax 500mbar, 3/8''

Spring-loaded pressure regulator with adjustable setpoint spring and defined counterspring. Internal tap of regulator output pressure, external pulse and blower pressure connections prepared. Suitable for controlling regulator output pressure via a pneumatic command variable.

Our newly transformed multipurpose office, with integrated workshop and store, to better serve our client.
Do contact us for more product information and we welcome your enquiry! 
Contact us :+603-80718844 to get in touch. 

• AB1 actuators  are particularly suitable for the control and regulation of modulating valves, butterfly valves, dampers and other fluid regulation systems requiring an angular positioning within 90° or 180°.
• The AB1 motor is unipolar and bidirectional with high static and maintaining torque, can operate on 3-position in the electric version or be piloted by analogical input signal in current or voltage in the electronic version
• Actuators of series AB1 have the certificate and EMC Electromagnetic Compatibility.

Design and built 150kW High Veocity Burner System for Furnace. 
Gas componenet from GECA and DUNGS.