Technical description The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2
- Two A valves in one housing - Double seat valves
- High flow rates
- Max. operating pressure up to 500 mbar (50 kPa)
- Fast closing
- Fast opening (DMV-D/11) or slow opening (DMV-DLE/11) with adjustable fast stroke for start gas volume
- Adjustable main volume
- DC solenoid
- Mountable closed position signal contact
- Threaded flange
- Compact, light-weightTechnical description The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
 

Technical description The VPS 504 is the valve proving system for DUNGS multiple actuators. The valve proving system complies with EN 1643:
- Equipment operates independent of residual pressure in the range of the permissible operating range.
- Test volume ≤ 4 l
- Setting work not necessary on site
- Short test period: min. 10 s, max. 26 s
- Tightness or leaks are displayed by an LED
- External fault display possible for series 02, series 04 and S05
- Group fault alarm optional for S01 (SSM)
- Suitable for TRD systems
- Electrical connection possible by plug connection S01, 02, 03. No rewiring is required for contact allocation as per DIN 4791.
- S04 and S05: electrical connection at screw terminals via PG 13.5 cable entry
- Art. Nr. (219881) 

Description: Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of flowing gas volume by adjusting main volume.

Type: MVD 205/5
p Max: 360
DN/Rp:Rp 1/2
Sole-noid No:100

Description:(CPI 400) The CPI 400 (closed position indicator) visually and electrically indicates when the valve is either open or closed. The CPI 400 mounts directly to DUNGS automatic shutoff valves and may be used as a proof of closure switch when factory set and sealed on a valve incorporating overtravel.

Specifications:
-Max. operating pressure 7 PSI (500 mbar)
-Connection G 1/8” ISO 228
-Temperature range -40 °F to +150 °F (-40 °C to +65 °C)
-Materials Brass housing (standard version) or stainless steel NBR based rubber

The MQM Quantometer is a turbine gas meter for operational natural gas volume measurement and for other non-aggressive gases such as propane, butane, air, CO2 or inert gases used in internal accounting and controlling processes of various types, especially in industrial thermal processing facilities.

Key features:

• Meter sizes from G 10 to G 1000
• Flow rates from 1,6 to 1600 m³/h
• Nominal sizes from Rp 1'' 25 to DN 150
• Pressure class PN 4/16
• Measuring ranges up to 1:20
• Maintenance free based on permanent lubrication of the bal bearings
• Meter body made of anodized high-strength aluminium A L2 L1 H1 H1 H2 H2 B C MQM Quantometer Product information
• Meter index head made of plastic as standard, aluminium as an option
• Optional: Manual lubrication of the ball bearings via the oil pump
• Rotating index head (355°)
• Recommended straight inlet pipe ≥ 3DN and outlet pipe ≥ 2DN
• Horizontal and vertical mounting position
• Approval according to DGRL/PED 2014/68/EU (Pressure Equipment Directive)
• Low-frequency pulse output as standard: HF pulse generator as an option

Materials   Bore:Full Bore

- Input pressures up to 500 mbar (50 kPa)

·Two single-stage solenoid valves normally closed, fast opening, fast